Wednesday, February 24, 2010

Painting 101

I sometimes get asked for advise on repainting furniture or cabinets. I thought I would write it all down in a blog post so it's handy for anyone who might need it. By posting this I am not saying I am an expert by any stretch of the imagination. I have however refinished 4 kitchens 4 bathrooms and countless pieces of furniture so I'll share the knowledge I do have.

PREP WORK


This will probably be the most time consuming part of your project.

- CLEAN. You want to thoroughly clean the item with soap and hot water. Be extra diligent if it's kitchen cabinets, they tend to have a grease build up you want to really get out.
- SAND. If the item has any rough spots, chipping paint, etc. you will want to sand them out. I hate sanding so I try to avoid it at all cost. Sometimes you just have to though.
-DEGLOSSER. I believe this is the greatest invention of my time...no joke. This stuff is amazing. You just take an old rag and wipe it on your item. Don't wipe it off, just let it dry. If you want you can do it again and again. This will prep the piece for primer, no sanding necessary. I almost never sand anymore thanks to this stuff. Yay for DeGlosser!!!

PRIMER

All I'm going to say is...YES!!! Primer is your friend. It doesn't matter if you paint it on or spray it on, just do it.

PAINTING



There are a few options as far as paint goes.

- PAINT AND PAINTBRUSH. Chose a favorite satin or semi-gloss paint and a REALLY good paintbrush. I can not stress the importance of a REALLY good paintbrush enough. My favorite is Purdy. It can be a bit of an investment but it is worth it. You will get nice even coverage with no brush strokes if you use a good brush. This is how I paint 90% of my projects.
- SPRAY PAINT. This is a great option because you get really good even coverage...if you do it right. Don't get ahead of yourself and lay it on thick. You want to do multiple light coats to get the best finished product. The downside to spay paint is that it can get very expensive. I spray paint my small projects or anything metal or plastic. I don't have a favorite brand but you'll want to use a good name brand not the $.99 Wal-mart can. That stuff is junk!!!! Buy the good stuff and you'll be fine.
- PAINT SPRAYER. This is probably the best option although it's the one I use the least. My husband is the master paint sprayer and I don't go there! He has spayed 2 out of the four kitchens we have re-done and the coverage is wonderful. We don't like to break it out for small projects because clean up is kind of a pain but sometimes it's just worth it. You can rent a paint sprayer for pretty cheap if you don't own one.

FINISHING

I do a few things to my finished projects.

DISTRESSING - You can do this a few different ways. You can rub wax on your project in the areas that you want to sand later so that the paint comes off easy and controlled. Or you can do like I do and just bust out the sander and go to work. I think it's a bit of an art that you learn the more you do. I've had my share of bad distress jobs. You can take it to next level and bang your piece up with chain or a screw driver. Distressing is a GREAT way to cover up you mistakes as well!

ANTIQUE GLAZE - I love this stuff. I've glazed cabinets and furniture alike. I've found a method that works after lots of trial and error. I like to brush the glaze on, then I wipe it right back off with an rag. That's it. Pretty simple but I used to try to rag it on, then rag it off and it always looked yucky.


POLY - I use a poly acrylic because it's specifically states that it is works on paint. The poly urethane didn't mention paint. You can probably use it but I didn't want to take a chance. Someone else who knows, feel free to chime in. Choose the finish that suits your needs: matte, satin or gloss. Again I just brush the poly on with a GOOD brush and let it dry. You can do additional coats for extra protection.


Now your done! Enjoy!

3 comments:

Michelle said...

LOVE LOve love this post! I stumbled across this blog http://knockoffwood.blogspot.com/ and am now obsessed! I want to make furniture soooo bad. I've got plans! I was a little worried about how to paint and/or finish. One question though, when distressing do you put the wax on before you paint or after? I know it's probably a silly question...

Georgia said...

Just the info on the deglosser was enough for me! It looks great and if you have already used it on projects then I'm sold! I will never start a project without it on hand.

Karina Rigtrup said...

Michelle, you put the wax on before you paint. That way when you sand over the top of it the paint will come right off.